Long Fishing Penn

Posted in Penn Fishing Gear by Penn Fishing Gear on January 5, 2012

Long Fishing Penn

Making Daily Living Comfortable And Safe By Using Prestressed Water Reservoirs

Because of its proven strength, concrete as a core material for the construction of large tanks is the most popular choice around the world. The concrete structure may, nonetheless, not be able to resist the powerful load of a full tank if it is not fortified with extra support, causing irreversible leakage. To ensure stability and safety, therefore, it is imperative that large concrete tanks be pre stressed. To maintain constant compression in the tank walls even when the tank is full, it is wrapped by high tension wire in a helix like manner around the walls and fully covered with concrete inside and out.

Concrete tanks come in different sizes but may only be necessary for bigger tanks of million gallon capacities because the cost increases as the tank becomes smaller. No less than 250,000 gallons is a suggested minimum. Most commercial concrete tanks can support about 10 40 million gallons though there is scarce information as to any upper ceiling. The walls of standpipe tanks can reach as high as 80 feet. If you have enjoyed our article on steel fibre get more great information on fibre reinforced concrete.

With the water tank load remaining uniform, a heavily reinforced concrete of 4 inch thickness is needed to provide flexibility. In an area where poor soil exists, prudence dictates the need for a fully reinforced floor structure. The groundwork along the perimeter of the floor needs to be reinforced with monolithic foundation to counter any deflections that may happen due to the loads coming from the roof and the walls.

The steady force of the steel wound around the tank walls bears down on fissures that can occur, preventing the possibility of seepage. Mild but uniform steel support is necessary to resist shrinkage and temperature stresses and allow small fissures to bond together on their own. Most tanks are required to be built according to accepted standards but some have unique styles and designs.

The factors that should be considered when designing the size of the panels are the type of soil, the availability of space and the number of users. For a standpipe tank with a height of over 80 feet, for example, extra thick wall panels are recommended. Precast wall panels are the modern day choice for almost all construction projects including tank building. The expertise of the precast panel manufacturer is crucial as the finished product would have an impact on the tank to be built. Shorter tanks may be safe with panels of moderate thickness like 4 inches, but extra tall panels can be as exceptionally thick as 15 inches. If you want more steel fibre resources visit steel reinforcing.

The water tightness of the core wall is ensured by the unified performance of the steel panel diaphragm, shotcrete encasement and steel wire running the height and periphery of the tank wall. The steel shell diaphragm is as well a strong backbone for the core wall of the tank. Vertical steel ribs upwardly running along the diaphragm sheets enhance tank wall endurance.

The backbone of the tank is entrusted to the steel enclosed in the concrete wall in a helix like manner. The tank is able to hold maximum capacity because the concrete walls are constantly compressed. Naturally, the volume of wire strapped around the bottom of the walls is more than that at the top because of the greater weight at the bottom

A vital consideration in the design of a tank is the merging of the walls and the floor. With the proper wall base and floor joints, the bottom of the wall is allowed to move slightly with the help of a special bearing pad. In this case, steel and concrete are compactly compressed together, thus, there is no room for any further strain even if the tank is in full capacity.

Earthquake cables help protect the tank body from being pushed off the floor, especially in earthquake prone locations. By implanting a water stop made of PVC on the tank floor and attaching the same to the walls, the prevention of leakage is assured while allowing flexibility. Although a concrete tank may be a bit more expensive than alternative products, its long term benefits far outweigh the costs.

No items matching your keywords were found.